Tightening of motor screws and nuts:
|Screw M 5||0.9|
|Screw M 10||4.0|
|Nuts M 8||2.3|
|Nut pinion||4.0 (with loctite 270)|
|Nut drum||4.0 (with loctite 242e)|
Use original C.R.S. srl spare parts, and exclusively ball bearings C.R.S. srl.
Oil change: 350cc A.T.F.
Running - in: 300 mt
|S 88 FC Diam. 36||Selettra 1.0 before the P.M.S.||0.74 - 0.76|
|S 88 ICC||Selettra 1.5 before the P.M.S.||0.74 - 0.76|
Revision connecting rod: after 100 lt.
Cylinder / piston coupling: 0.055 - 0.060
(N.B. Every time that the piston is replaced, verify the squish value.)
Replace the pivot roller bearing cage every 60 lt.
N.B. The motor is delivered exclusively for competitions, therefore is not
covered by guarantee.
We decline all civil and penal responsibilities and for the use of the motor.
TS Racing, Inc.
123 West Seminole Ave. Bushnell, Fl 33513 USA
Monday - Friday 7:30 am to 5:30 pm
Orders Only 800-962-4108
We are your one stop shop for all your karting needs!!!
Remember, we don't just build killer engines (over 120 National Titles), we carry a full line of karts, parts and accessories. We are Florida's largest warehouse distributor for karting's biggest names. If you don't see a specific idea or part in our catalog just ask, we probably have it or can get it soon.
WE accept Mastercard, Visa and Discover
Shipping by UPS and FedEx
Design by B/Z Technologies
Web site comments to: Webmaster@tsracing.com
Copyright © 1999 - 2012 B/Z
Technologies. All rights reserved. Terms